A wood fireplace that is primarily used to provide heat to a room or entire home.

Conventional, masonry fireplaces without energy saving features, often take more heat from a space than they put into it.

A masonry fireplace may look warm and cozy; but, all things considered, it tends to be relatively inefficient for home heating. Believe it or not, masonry fireplace efficiencies typically range from plus 10% to minus 10%. The negative efficiency results from the fire sucking heated air from inside the home to fuel combustion. This air is then vented up the chimney, which pulls cold outside air into the home through the small cracks around windows and doors.

Even when there is no fire burning, fireplaces can vent heated air - especially when there is no flue damper, if the damper does not seal tightly, or is left open.

Here are some ways to improve fireplace efficiency:

Replace your existing fireplace with a new high efficiency Napoleon fireplace. Napoleon energy efficient fireplaces are zero clearance built-in models. These new hi-tech fireplaces can heat entire homes or can be used for room space heating. Napoleon wood burning fireplaces are eloquent and can provide a great looking center piece to your living room or rec room.

• • If your fireplace does not have a damper, the first improvement should be to install one so that you can close off the chimney when the fireplace isn't being used. Non-flammable open and closed signs that hang from the damper handle make it easy to remember if a damper is open or closed.
    
  • Installing glass doors on your fireplace will help prevent heated room air from escaping up the chimney. The fire still draws air through vents below the doors, but only enough to burn the fuel.
  • While glass doors improve the overall efficiency of a fireplace and still enable you to see the fire, they do have one drawback: they partially block the direct radiant heat you feel from the fire.
  • Another improvement is to duct outside air into the fireplace. This is even more effective when combined with the installation of glass doors. Then the fireplace does not use room air for combustion at all. If you have glass doors, the vents can be sealed completely.
  • If you are building a new fireplace, install ducts around it, so that cool room air is drawn in, circulated around the firebox, and ducted back into the room. The ducts are completely self-contained, and the air never mixes with the chimney smoke. If you want to have the warmed air blown out at floor level, so that it will heat the room even better, install a fan in the duct system.
  • If you have an existing fireplace and are not able to build a duct system around it, install a small-scale duct system in the firebox. This heat exchanger consists of hollow tubes bent into a shape that fits around the fire. Cool air from the floor enters the bottom of each tube, is heated by the fire, and convected out the top of the tube and into the room.
  • With one of the many available heat-circulating fireplace and chimney adapter systems, you can increase fireplace efficiency up to about 40%. These so-called fireplace inserts consist of a double-walled firebox, several air ducts, and depending on the model, a blower to speed the movement of heated air.

We offer Napoleon efficient wood burning fireplaces. Free shipping and great customer service is standard at New Energy Distributing, Inc