Ventis AC06400 is a 6' x 3/4" Self-Adhesive Glass Gasket Replacement Kit

To install, the gasket must be centred on the edge of the glass. To do this easily, peel back a section of the paper covering the adhesive and place the gasket on a table with the adhesive side up. Stick the end of the gasket to the middle of one edge, then press the edge of the glass down onto the gasket, taking care that it is perfectly centred on the gasket.

Peel off more of the backing and rotate the glass and press the next section onto the gasket. Do not stretch the gasket as you place it. Do not apply the gasket on the center edge of the glass.

Now pinch the gasket to the glass in a U shape, all around the glass.

Reinstall the glass, being careful to centre the glass carefully in the door. Do not over-tighten the screws. Note that the two main causes of broken door glass are uneven placement in the door and over-tightening of retaining screws.

This Glass Gasket is use on:

HES170,

HES240,

HEI170,

HEI240,

HE250R,

HE275CF,

HE325,

HE350,

ME300.

Carcinogens: This product can expose you to chemicals including Lead, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.