Marco Fireplaces were originally built in southern California. Literally 1000’s of Marco wood burning and Marco gas burning fireplaces were produced and sold throughout North America. Marco Fireplace quickly became a brand of choice for many builders looking for a quality wood burning fireplace or gas burning fireplace.
OEM Fireplace Doors - Complete Set of (2) doors Only Black Trim is available Download door cross reference chart These doors are not air tight or sealed glass door kit. The doors will require adjustments at time of install. Please see adjustment procedure included with door kit. It is recommended to use only OEM doors on your Marco Fireplace.
LNX36ABF
OEM Fireplace Doors - Complete Set of 2 Doors Door finish available in Black Trim only Download door cross reference chart These doors are not air tight or sealed glass door kit. The doors will require adjustments at time of install. Please see adjustment procedure included with door kit. It is recommended to use only OEM doors on your Marco Fireplace. Due to special packaging, this item does not qualify for free shipping
LNX42ABF
Priced each, one required per door
LNXH5396
Priced each, one required per door
LNXH6697
Fireplace Screen
LNXH4408
Fireplace Screen
LNXH6208
This Screen rod is only used with Marco branded fireplaces. The rod end slides into a small hole at the upper right or left with the center of rod held in with a small screw (not supplied).
LNXH6309
Note: Due to weight and special packaging, this item does not qualify for free shipping and is NON RETURNABLE
Price per panel. Fits bottom (hearth), back, left or right. Order multiple panels to cover larger areas.Can be altered to fit Marco Fireplaces
Read important curing information
HARU2428
Note: Due to weight and special packaging, this item does not qualify for free shipping and is NON RETURNABLE $189.99 per panel plus shipping. Fits bottom (hearth), back, left or right. Order multiple panels to cover larger areas.Can be altered to fit Marco Fireplaces Read important curing information
HARU2440
FREE SHIPPING: Due to special packaging, this item does not qualify for return privileges - NON RETURNABLE When using this panel for the rear application do not install tightly to the side panels. Allow 1/4" gap for expansion contraction to avoid premature cracking. It is recommended that the maximum width of any panel not exceed 18�. For example, if your rear panel dimension is 30�, it is suggested to divide the rear panel into two pieces 15� wide (expansion joint). Height of the panel is not restricted in this way.The full installation manual link is below. Please pick large or small brick pattern from the drop down box. Panels are 1" Thick Small Brick Pattern - 3" x 8" Large Brick Pattern - 4" x 8" Price per panel.
NEU3024-850
Price per brick: Due to weight and special packaging, this item does not qualify for free shipping and is NON RETURNABLE
IHPH5612
When ordering LP gas you will also receive LP gas regulator RS1751-013
RS710-502
This item DOES NOT qualify for return privileges. Price and ordering is per sq. foot. In Quantity box above, Enter the number of square feet desired. Select 100 sq ft for a full box (4 ft x 25 ft) Whenever possible, pieces are contiguous - if you order 4 sq ft, you will get one piece 1 ft x 4 ft Click here for testing standards
INSUL1
