RUTLAND E-Z Spread Fiberglass Stove Gasket Cement is designed specifically to be the easiest gasket cement for affixing fiberglass gaskets to steel and cast iron. Very easy to spread and control application and will not expand or contract during continued use.
- 2.3 fl oz Tube
- Rated to 2000°F (1090°C)
- Requires heat to cure
- Can be painted once dry
- For indoor use
- Approximate coverage: 29′ (2.3 fl oz) or 99′ (10.3 fl oz), both with 1/8” bead
- Made in the USA
DIRECTIONS: Knead tube before use. Cut tube tip to the desired opening. Dampen area with water and apply minimum amount of cement required into gasket channel, then press the gasket firmly into the cement. Close the door to ensure a good seal, then trim excess gasket. Allow to air dry for 1 hour with the door open. Within 30 days, start a fire and gradually increase the heat to 500°F (260°C) to cure.
WARNING: This product can expose you to chemicals including Carbon Black and Crystalline Silica, which are known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov
